I ran into networking problems, OS/2 was not behaving correctly with PCI NICs so I moved to a old Compaq PC, the specs will be at the bottom of this post.
After installing the correct driver I set the protocol to IBM TCP/IP, when the install is finished I went to LAN settings and changed the router settings to reflect what I had seen in the video https://www.youtube.com/watch?v=qrG2MUNneHc setting a DEFAULT route after a NET route with the destination set to 10.
If you ever have to work on OS/2 for anything other than a hobby or fun..... may god help you.
512MB of RAM
1GB SSD (IDE)
CPU AMD Sempron 2800+
Mainboard A7V8X-LA rev 2.02 https://theretroweb.com/motherboards/s/a...-oem#chips
After installing the correct driver I set the protocol to IBM TCP/IP, when the install is finished I went to LAN settings and changed the router settings to reflect what I had seen in the video https://www.youtube.com/watch?v=qrG2MUNneHc setting a DEFAULT route after a NET route with the destination set to 10.
If you ever have to work on OS/2 for anything other than a hobby or fun..... may god help you.
512MB of RAM
1GB SSD (IDE)
CPU AMD Sempron 2800+
Mainboard A7V8X-LA rev 2.02 https://theretroweb.com/motherboards/s/a...-oem#chips
Corbin, Webmaster, System Admin, Database Manager, Robotics Team Mentor, Cable Installation Tech.
Email: corbinpieper05@gmail.com
Fidonet Email: corpie@1:120/616 OR corpie@p1.n616.r120.z1.fidonet.org - (no guarantee I get messages from these addresses)
Email: corbinpieper05@gmail.com
Fidonet Email: corpie@1:120/616 OR corpie@p1.n616.r120.z1.fidonet.org - (no guarantee I get messages from these addresses)