          Network Everywhere Fast Ethernet Adapter(NC100 v2)
                NetWare 32-bit ODI Driver Installation
                ======================================

              Copyright (C) 2000 by Network Everywhere
              All rights reserved.

NetWare DOS ODI Server Driver Installation (NetWare 4.11)
=========================================================

Requirements:
-------------
        NetworkEverywhere Driver Diskette  (NC100.LAN)

Installation Procedure:
-----------------------
1. Insert the NetworkEverywhere Driver Diskette into drive A
   and check the contents of subdirectory  \NW411
   It should contain the following file :

   NC100.LAN   	Novell NetWare V4.11 Server Driver for
                Network Everywhere Fast Ethernet adapter
   NC100.LDI 	Novell NetWare V4.11 Server Driver Installation
                Information File.
   AUTOEXEC.NCF

2. At the NetWare prompt (indicated by the Server name),
   run the INSTALL.NLM program by typing:

   server name: LOAD INSTALL <Enter>

3. Select "Maintenance/Selective Install" and press <Enter>.

4. Select "LAN Driver Options (Configure/Load/...)"
   and press <Enter>.

5. Press the <Ins> key to specify other drivers to install.

6. Press <F3> and specify the driver path (A:\NW411)
   and press <Enter>.

7. The NC100.LAN driver should appear in your choice list for
   the 'Select a LAN Driver' field. Choose this driver to
   start the driver loading and binding procedure. This
   will allow you to load and bind all 4 frame types supported
   by NetWare.

8. Next time you start up your system, simply follow steps
   2 to 4 to complete the installation.



All trademarks and brand names mentioned belong to their
respective owners.


-- THE END --
